Cleaning and Painting
Tidy up
Remove all timber and construction tools.
Burr
Remove the iron burr at the rotor
Grinding
Using a special 3M™ Cubitron™ II Bonded Abrasive Wheels for my 230mm angle grinder.
Cubitron™ II bonded abrasive wheels bring the best of 3M precision-shaped grain technology to the toughest jobs like beveling, scale removal, and weld leveling. These cool-cutting wheels can remove the same amount of material with less pressure required, making them easier to use.
Preparations
removing the concrete formwork.
M33
Nuts and bolts for the tower
Replant
Making some room for heavy equipment
Fill up
the tower base with cement...
Leveling
Fixing application to level the waterdrain.
Replant
quick setting and hardening concrete using pour mortar.
Painting
Prestofix, corrosion resistant ground and topcoat for industrial application. painting with RAL 7035 Light Grey.
Painting
RAL 7035 Light Grey.
Result halfway
The rotor engines are painted, next the base itself.
Cleaning
with pressure washer
Painting
RAL 7035 Light Grey.
Painting
RAL 7035 Light Grey.
Painting
Innercircle
Grease
Universal Grease ST Q7 ie a green colored universal fat, based on a lithium and a mineral base oil. In addition a small amount of polymers provide an exceptionally good adhesion and a beautiful structure - There are also special anti-corrosivity, anti-wear and extreme pressure additives added to obtain the best properties:
Grease
Removing the old grease with a stick. (looks like S##T
Grease
Looking at the grease UMETA Grease Nipple fitting, which is a metal fitting used in this bearing to feed lubricating grease STQ7, into a bearing under moderate to high pressure using a grease gun.
Grease
Under moderate to high pressure using a grease gun.
Grease
It seems there is enough coming out...
